亞馬遜官方課程：使用 Send to Amazon 創建貨件包裹操作流程

亞馬遜觀察

2022-03-26

2336

Send to Amazon（測試版）是一個全新的標準化貨件創建流程，它簡化了流程，只需要較少的步驟就可以補充亞馬遜庫存。

使用 Send to Amazon 創建貨件

Send to Amazon（測試版）是一個全新的標準化貨件創建流程，它簡化了流程，只需要較少的步驟就可以補充。

利用 Send to Amazon，您可以創建可重復使用的裝箱模板，以便為您的 SKU 提供箱內物品信息、包裝箱重量和尺寸以及預處理和貼標詳情。在模板中保存這些詳情后，您無需為每個貨件重新輸入這些詳情，從而節省了時間。由于您的裝箱模板中已經包含所有必要信息，因此無需提供額外的箱內物品信息。

Send to Amazon 是否適合我？

Send to Amazon 目前支持：

通過亞馬遜合作承運人或非合作承運人配送的小包裹貨件
按照一箱一 SKU 的原則打包的貨件（通過非合作承運人以托拍貨件的形式配送）

此版本的 Send to Amazon 尚不支持通過亞馬遜合作承運人配送托拍貨件，也不支持按照一箱多 SKU 的原則打包貨件。我們正在努力添加功能。在此之前，請訪問將商品運輸到亞馬遜以了解其他配送方式。

貨件要求

Send to Amazon 貨件必須符合以下要求：

每個貨件箱中只能包含一個 SKU 的商品
運輸和路線安排要求
包裝要求
有關汽運零擔、整車運輸和整箱裝載配送的賣家要求

重要：您可以使用 Send to Amazon 創建包含多個 SKU 的貨件，但貨件中的每個包裝箱只能容納一個 SKU 的商品。

開始使用 Send to Amazon

要開始使用簡化的工作流程，請轉到貨件處理進度，然后點擊【Send to Amazon】，以查看您的亞馬遜物流 SKU 列表并創建裝箱模板。

利用裝箱模板，您可以保存有關按照一箱一 SKU 原則進行包裝、預處理和貼標的信息。您可以在每次補貨時重復使用這些模板。

創建裝箱模板的方法如下：

在可用亞馬遜物流 SKU 列表中，針對要處理的 SKU 點擊【創建新的裝箱模板】。

在模板中輸入以下信息：

模板名稱：為模板命名，以便將此模板與您為同一 SKU 創建的其他模板區分開來
每個包裝箱的商品數量：每個貨件箱中可售商品的數量
包裝箱尺寸：貨件箱的外部尺寸
包裝箱重量：包裝后的貨件箱的總重量（包括填充物的重量）
預處理分類：您的 SKU 的包裝和預處理要求
商品預處理方（如果需要）：如果您的商品將在送達運營中心之前進行預處理，請選擇【賣家】。選擇【亞馬遜】，則可以使用亞馬遜物流預處理服務。
商品貼標方（如果需要）：如果您的商品將在送達運營中心之前貼標，請選擇【賣家】。選擇【亞馬遜】，則可以使用亞馬遜物流貼標服務。如果您使用追蹤庫存，則可能不需要使用貼標。

點擊【保存】。

當您為 SKU 創建裝箱模板后，該模板將在工作流程的第 1 步【選擇要發送的庫存】中顯示在您的 SKU 旁邊。您現在可以查看或編輯裝箱模板詳情。

重要：如果您不提供準確的箱內物品信息，我們可能會阻止您今后運送貨件。所有貨件均需提供準確的包裝箱重量和尺寸。有關更多信息，請參閱運輸和路線安排要求。

接下來，按照工作流程中的其余步驟創建貨件

第 1 步：選擇要發送的庫存
第 2 步：確認發貨
第 3 步：打印包裝箱標簽
第 4 步：確認承運人和托拍信息（僅針對托拍貨件）

要了解如何更改或取消貨件，請訪問更改或取消貨件。

常見問題

我何時應使用 Send to Amazon 而不使用其他標準化貨件創建流程？

利用 Send to Amazon，您可以為按照一箱一 SKU 的原則打包的庫存（可以是通過非合作承運人配送的托拍貨件，也可以是通過亞馬遜合作承運人或非合作承運人配送的小包裹貨件）創建可重復使用的裝箱模版，從而節省您的時間。您可以使用 Send to Amazon 創建包含多個 SKU 的貨件，但貨件中的每個包裝箱只能容納一個 SKU 的商品。

要使用包含多個 SKU 的包裝箱運送庫存，或者要使用亞馬遜合作承運人運送托拍貨件，請使用備用標準化貨件創建流程。有關更多信息，請訪問將商品運輸到亞馬遜。

我是否可以使用 Send to Amazon 將 SKU 轉換為亞馬遜物流？

不可以。貨件工作流程第 1 步選擇要發送的庫存中僅顯示已轉換為的 SKU。要了解如何將 SKU 轉換為亞馬遜物流，請參閱開始使用亞馬遜物流。

如何查看我的入庫計劃？

在工作流程的第 2 步確認發貨中批準貨件之前，您可以離開 Send to Amazon，然后從之前中斷的地方繼續操作。要查看已確認的貨件的詳情，請轉至“貨件處理進度”，點擊貨件以查看“一覽”頁面。在此處，點擊【查看貨件】。

商城網絡服務 (MWS) 中是否提供 Send to Amazon？

不提供。目前僅賣家平臺提供 Send to Amazon。

我可以合并貨件嗎？

通過 Send to Amazon 創建的貨件無法與其他任何貨件合并。

如何在 Send to Amazon 中提供箱內物品信息？

創建裝箱模板時，系統會收集箱內物品信息。只要模板信息與您的箱內物品相符，就無需提供其他箱內物品信息。

Send to Amazon 貨件是否需要支付人工處理費？

不需要。對于此工作流程，我們會在裝箱模板中提前收集箱內物品信息。這意味著您將自動為您運往運營中心的每個包裝箱提供箱內物品信息。只要此信息準確無誤，我們就能夠高效接收您的庫存，并且無需您支付人工處理費。

如何為 SKU 編輯裝箱模板或創建新裝箱模板？

在工作流程的第 1 步中，點擊 SKU 裝箱模板對應的【查看/編輯】。要編輯現有模板，請從【裝箱模板】下拉菜單中選擇您要編輯的模板名稱，然后點擊【編輯裝箱模板】。要為該 SKU 創建新模板，請點擊【裝箱模板】下拉菜單，然后選擇【創建裝箱模板】。

我可以為每個 SKU 創建多少個裝箱模板？

最多可以為每個 SKU 創建三個裝箱模板。

包裝箱尺寸和重量是多少？

在裝箱模板中，包裝箱尺寸和重量字段與您將交給承運人的包裝箱對應。尺寸是包裝箱的外部尺寸，重量是包裝后的貨件箱的總重量（包括填充物的重量）。

重要：我們對包裝箱的重量和尺寸執行嚴格的管理政策。將超重或超大包裝箱運送到運營中心可能會導致我們阻止您今后向運營中心運送貨件。有關更多信息，請參閱運輸和路線安排要求。

什么是預處理和貼標？

對于每個裝箱模板，我們需要知道商品的預處理和貼標方式，以及是由您還是亞馬遜對每個商品進行預處理和貼標。如果 SKU 的預處理說明已確定，它們將顯示在裝箱模板上。如果預處理說明未確定，請在創建模板時選擇它們。有關更多信息，請參閱包裝和預處理要求。

如果您的 SKU 有資格使用制造商條形碼進行配送，則您可能無需為單件商品貼標。了解有關使用制造商條形碼追蹤庫存的更多信息。

如何打印商品標簽？

可通過兩種方式打印商品標簽。

在第 1 步選擇要發送的庫存中：在 SKU 列表中，找到要貼標的 SKU。點擊【獲取商品標簽】，設置【商品標簽打印格式】，輸入要打印的標簽數量，然后點擊【打印】。
在第 3 步打印包裝箱標簽中：在【查看內容】中，設置【商品標簽打印格式】，找到要貼標的一個或多個 SKU，輸入要打印的標簽數量，然后點擊【打印】。

我已經解決了裝箱模板中的錯誤。為什么我一直看到錯誤消息？

如果您的裝箱模板顯示錯誤消息且您已解決，請重新保存裝箱模板。這將刷新該 SKU 的資格檢查。如果錯誤已得到解決，您將不會再看到錯誤消息。

Create shipments with Send to Amazon
Send to Amazon (beta) is a new shipment creation workflow with a streamlined process that requires fewer steps to replenish your Fulfillment by Amazon (FBA) inventory.
Send to Amazon lets you create reusable packing templates to provide box content information, box weight and dimensions, and prep and labeling details for your SKUs. Once you save those details in a template, you will not have to re-enter them for each shipment, saving you time. Additional box content information is not required, since all the necessary information is already in your packing templates.

Is Send to Amazon right for me?
Send to Amazon currently supports:
Small parcel shipments using either an Amazon partnered carrier or a non-partnered carrier
Single-SKU boxes sent as pallet shipments using a non-partnered carrier
Shipments of boxes that contain more than one SKU and pallet shipments using an Amazon partnered carrier are not supported in this version of Send to Amazon. We are working to add features. Until then, visit Shipping products to Amazon for alternative shipment methods.

Shipment requirements
Send to Amazon shipments must meet the following requirements:
Each shipping box must contain units of only one SKU
Shipping and routing requirements
Packaging requirements
Seller requirements for LTL, FTL, and FCL deliveries
Important: You can use Send to Amazon to create shipments containing more than one SKU, but each box in a shipment must contain only one SKU.

Get started with Send to Amazon
To start using the streamlined workflow, go to your Shipping Queue and click Send to Amazon to see a list of your FBA SKUs and create packing templates.
Packing templates let you save information about how your SKUs are packed, prepped, and labeled in a single-SKU box. You can reuse the templates each time you replenish inventory.
Here's how to create a packing template:
In the list of your available FBA SKUs, click Create new packing template for the SKU you want to work on.

Enter the following information into the template:
Template name: Name the template so you can tell it apart from others you may create for the same SKU
Units per box: The number of sellable units in each shipping box
Box dimensions: The outside dimensions of the shipping box
Box weight: The total weight of a packed shipping box, including dunnage
Prep category: The packaging and prep requirements for your SKU
Who preps units (if required): Choose Seller if your units will be prepped before they arrive at the fulfillment center. Choose Amazon to opt in to the Preparation Service.
Who labels units (if required): Choose Seller if your units will be labeled before they arrive at the fulfillment center. Choose Amazon to opt in to the FBA Label Service. Labeling with an Amazon barcode may not be required if your inventory is tracked using a manufacturer barcode.
Click Save.

Once you’ve created a packing template for a SKU, the template will show up next to your SKU in step 1 of the workflow, Choose inventory to send. You can now see or edit the packing template details.
Important: Failure to provide accurate box content information might result in blocking of future shipments. Accurate box weight and dimensions are required for all shipments. For more information, see Shipping and routing requirements.

Next, follow the remaining steps in the workflow to create your shipment
Step 1 — Choose inventory to send
Step 2 — Confirm shipping
Step 3 — Print box labels
Step 4 — Confirm carrier and pallet information (for pallet shipments only)
To learn how to change or cancel your shipment, visit Change or cancel a shipment.

Frequently asked questions
When should I use Send to Amazon instead of a different shipment creation workflow?
Send to Amazon saves you time by letting you create reusable packing templates for inventory packed in single-SKU boxes sent as pallet shipments using a non-partnered carrier or as small parcel shipments using either an Amazon partnered carrier or a non-partnered carrier. You can use Send to Amazon to create shipments containing more than one SKU, but each box in a shipment must contain only one SKU.
To send inventory in boxes that contain more than one SKU or to send pallet shipments using an Amazon partnered carrier, use an alternative shipment creation workflow. For more information, visit Shipping products to Amazon.
Can I convert SKUs to FBA using Send to Amazon?
No, only SKUs that already have been converted to are displayed in step 1 of the shipment workflow, Choose inventory to send. To learn how to convert SKUs to FBA, see Getting started with Fulfillment by Amazon.
How do I see my shipping plan?
Before approving shipments in step 2 of the workflow, Confirm shipping , you can leave Send to Amazon and return to the place you left. To see details for shipments that have been confirmed, go to your Shipping Queue and click on the shipment to see the summary page. From there, click View shipment.
Is Send to Amazon available in Marketplace Web Service (MWS)?
No, at this time, Send to Amazon is available only in Seller Central.
Can I merge shipments?
Shipments created through Send to Amazon cannot be merged with any other shipment.
How do I provide box content information in Send to Amazon?
Box content information is collected when you create a packing template. As long as the template information matches the contents of your box, no additional box content information is required.
Does the manual processing fee apply to Send to Amazon shipments?
No. To use this workflow, box content information is collected in advance in the packing template. This means you will automatically provide box content information for each box you send to a fulfillment center. As long as this information is accurate, we will be able to receive your inventory efficiently, and no manual processing fee will be assessed.
How do I edit a packing template or create a new one for a SKU?
From step 1 in the workflow, click View/edit for a SKU packing template. To edit an existing template, select the name of the template you want to edit from the Packing template drop-down menu and click Edit packing template. To create a new template for that SKU, click the Packing template drop-down menu and select Create packing template.
How many packing templates can I create per SKU?
You can create a maximum of three packing templates per SKU.
What are box dimensions and weights?
In the packing template, the box dimensions and weight fields correspond to the box you’ll hand off to your carrier. Dimensions are the outside dimensions of the box, and the weight is the total weight of the packed shipping box, including dunnage.
Important: Box weight and dimension policies are strictly enforced. Sending overweight or oversize boxes to the fulfillment center may lead to blocking of future shipments. For more information, see Shipping and routing requirements.
What is prep and labeling?
For each packing template, we need to know how your items are prepped and labeled, and whether you or Amazon are prepping and labeling individual units. If prep instructions are known for your SKU, they will be displayed in the packing template. If they are not known, select them when you create the template. For more information, see Packaging and prep requirements.
If your SKU is eligible to ship with a manufacturer barcode, you may not have to label individual items. Learn more about using a manufacturer barcode to track inventory.
How do I print item labels?
There are two ways to print item labels.
In step 1, Choose inventory to send: From the list of SKUs, find the SKU you’re labeling. Click Get unit labels, set the Unit label printing format, enter the number of labels to print, and click Print.
In step 3, Print box labels: From View contents, set the Unit label printing format, find the SKU or SKUs you’re labeling, enter the number of labels to print, and click Print.
I resolved an error in my packing template. Why do I keep seeing the error message?
If your packing template shows an error message and you have resolved it, re-save your packing template. This will refresh the eligibility checks on the SKU. If the error has been resolved, you will no longer see the error message.